TM 9-1240-380-34
PLUNGER, SPRING, RETAINING RING, AND KEY INSTALLATION
APPLICABLE CONFIGURATIONS: M36
TOOLS: Scriber
Tweezers
3/16" flat tip screwdriver
PERSONNEL: One
EQUIPMENT CONDITION: Infrared body assembly on work bench
Procedure
While holding bracket (1) in slot of key (2), use screwdriver to install screw (3).
While holding bracket (1) and key (2) on infrared body assembly (4), use screwdriver to
install two screws (5).
Using your fingers, install spring (6) into key (2).
Push plunger (7) part way through hole in key (2) slot up.
Using tweezers, place retaining ring (8) over plunger (7).
Using scriber, press on plunger (7) and slide retaining ring (8) until it fits into groove of
plunger (7).
NOTE
FOLLOW-ON MAINTENANCE:
END OF TASK
Vol II