TM 9-1240-262-34&P
NOTE : When a stock numbered item is
C-5. HOW TO LOCATE REPAIR
r e q u i s i t i o n e d , the item received may
PARTS.
have a different part number than the
p a r t being replaced.
a. When National Stock Number
o r Part Number is Unknown:
f . Description.
I n d i c a t e s the
( 1 ) F i r s t . U s i n g the table
F e d e r a l item name and, if required, a
o f c o n t e n t s , determine the functional
m i n i m u m description to identify the
group within which the item belongs.
item.
T h i s is necessary since illustrations
a r e prepared for functional groups,
g . Unit of Measure (U/M).
a n d listings are divided into the same
I n d i c a t e s the standard of the basic
groups.
q u a n t i t y of the listed item as used
in performing the actual maintenance
(2) Second. Find the
f u n c t i o n . This measure is expressed
i l l u s t r a t i o n covering the functional
b y a two-character alphabetical
group to which the item belongs.
abbreviation (e.g., ea, in, pr, etc).
When the unit of measure differs from
( 3 ) T h i r d . identify the item
t h e unit of issue, the lowest unit of
o n the illustration and note the
i s s u e that will satisfy the required
i l l u s t r a t i o n figure and item number
u n i t s of measure will be requisitioned.
o f the item.
h . Q u a n t i t y Incorporated in Unit.
( 4 ) F o u r t h . Using the Repair
P a r t s Listing, find the figure and item
I n d i c a t e s the quantity of the item used
in the breakout shown on the
n u m b e r noted on the illustration.
i l l u s t r a t i o n figure, which is prepared
f o r a functional group, subfunctional
b . When National Stock Number
g r o u p , or an assembly. A "V" appearing
or Part Number is Known:
i n this column in lieu of a quantity
indicates that no specific quantity
( 1 ) F i r s t . Using the Index
is applicable, (e.g., shims, spacers,
of National Stock Numbers and Part
etc).
N u m b e r s , find the pertinent National
stock number or part number. This index
C-4. SPECIAL INFORMATION.
i s in NIIN sequence followed by a list
of part numbers in alphameric sequence,
Usable on codes are shown in
cross-referenced to the illustration
t h e description column. Uncoded items
figure number and item number.
are applicable to all models.
I d e n t i f i c a t i o n of the usable codes used
( 2 ) s e c o n d . After finding
in this publication are:
t h e figure and item number, locate the
figure and item number in the repair
Used On
Code
parts list.
TELESCOPE, ARTICULATED, M105D
663
C-6. ABBREVIATIONS.
TELESCOPE, ARTICULATED, M105F
712
(Not Applicable)
C - 5 / ( C - 6 blank)
