TM 9-1240-216-34
4-32.
RESISTOR ASSEMBLY REMOVAL (CONT)
FRAME 2
Step
Procedure
Using screwdriver, remove screw (1) and washer (2) which hold white wire (3) of
1.
resistor (4) to terminal board (5).
Using screwdriver, remove screw (6) and washer (7) which hold red wire (8) of resistor
2.
(4) to terminal board (5).
WARNING
Dry cleaning solvent can catch on fire. Keep it and all
materials that can catch on fire away from flames. Use
only in a room with a lot of fresh air.
Clean sealing compound from hole (9) in body assembly (10) where bushing was
3.
installed.
Using long nose pliers, remove nut (11) and lockwasher (12) which hold resistor (4) to
4.
body assembly (10).
Lift resistor (4) out of body assembly (10).
5.
END OF TASK
Para 4-32 Cont
4-60
Vol II
