TM 9-1240-216-34
Section 10. RESISTOR ASSEMBLY
RESISTOR ASSEMBLY MAINTENANCE PROCEDURES INDEX
4-31.
Reference (para)
Task
Removal
Installation
RESISTOR ASSEMBLY REMOVAL
4-32.
APPLICABLE CONFIGURATIONS: M19 and M24 old configurations
TOOLS:
1/2" open end wrench
6" long nose pliers
3/16" flat tip screwdriver
6" slip joint pliers
1/16" socket head screw key (Allen wrench or equivalent)
Solvent (item 9, App A)
SUPPLIES:
PERSONNEL: One
EQUIPMENT CONDITION: Body assembly on work bench; power disconnected
PRELIMINARY PROCEDURES: Remove cover (para 4-14)
Remove cable (para 4-20)
Remove electron tube (para 4-29)
NOTE
This procedure is for removal of either resistor.
FRAME 1
Procedure
Step
1.
Remove cap (1) and washer (2) from bushing (3).
Using screwdriver, remove screw (4) and lockwasher (5) which hold chain of cap (1) to
2.
body assembly (6).
Using open end wrench, remove nut (7) from busting (3).
3.
4.
Using Allen wrench, remove setscrew (8) from bushing (3).
Para 4-31
4-58
Vol II
