TM9-1240-401-34&P
a. Disassembly-continued
Remove two machine screws (25), two lock-
7
washers (26), and two retaining straps (27). Dis-
card Iockwashers.
Remove machine screw (28), Iockwasher (29), and
8
retaining strap (30). Discard Iockwasher.
Remove three machine screws (31 ), plate (32),
9
and toggle switch (33) as a unit.
Remove nut (34), washer (35), and plate (32) from
10
toggle switch (33).
11
Unsolder wire (36) and wire (37) from toggle switch
(33).
Remove cap screw (38), Iockwasher (39), and lug
12
terminal (40) with attached wire (41).
13
Remove two machine screws (42) and two clamps
(43).
Remove machine screw (44), shoulder pin (45),
14
plate (46), and receptacle shell (47).
Remove two nuts (48) and two lug terminals (49)
15
with wires (50) attached from two contacts (51 ).
16
Remove insulator (52) only if necessary for re-
placement.
Remove two cap screws (53), two Iockwashers
17
(54), plate insulator (55), and plate insulator (56).
Discard Iockwashers.
Remove two machine screws (57), two wires (58)
18
with two lug terminals (59) attached, and plate
(60).
4-12
