TM 9-1240-401-34&P
4-13. M145/M145A1 TELESCOPE MOUNT MAINTENANCE INSTRUCTIONS
a. Disassembly b. Repair
c. Assembly
This task covers:
Lockwashers (5) (Item 64, appx E)
Tools
Lockwashers (4) (Item 65, appx E)
Soldering iron (Item 24, appx F)
Lockwashers (7) (Item 68, appx E)
Lockwashers (2) (Item 70, appx E)
Tool Kit, Electronic System, Repair, Field Mainte-
Lockwashers (4) (Item 73, appx E)
nance(SC5180-95-CL-B29)
Oil, lubricating (Item 9, appx B)
Sealing compound (Item 13, appx B)
Solder (Item 18, appx B)
Torque adapter (Item 6, appx F)
References
Torque wrench (Item 36, appx F)
TM 9-254
..
ment Condition
Flux (Item 5, appx B)
M145/M145A1 telescope mount installed on
Grease (Item 6, appx B)
howitzer.
Lockwashers (3) (Item 63, appx E)
t
1
a. Disassembly
I
1
Remove three machine screws (1), three lock-
washers (2), and plate insulator (3). Discard lock-
washers.
Remove three machine screws (4), three lock-
2
washers (5), and three wires (6) with three lug ter-
minals (7) and three sleeves (8) attached. Discard
Iockwashers.
Remove two machine screws (9), two Iockwashers
3
(10), two wires (11) with two lug terminals (12) and
two sleeves (13) attached, plate (14), and plate
insulator (15). Discard Iockwashers.
Remove machine screw (16), Iockwasher (17), and
4
retaining strap (18). Discard Iockwasher.
5
Remove two machine screws (19), disk insulator
(20), and disk insulator (21).
6
Remove machine screw (22) and nut (23) from two
lug terminals (24).
4-11
