TM 9-1240-400-34&P
2-5. CATEGORIES OF INSPECTION. Categories of inspection define responsibilities:
a. An initial inspection of the Ml15 panoramic telescope is performed immediately on receipt for maintenance. This
inspection will determine the amount and type of work to be performed.
b. A final inspection of the M115 panoramic telescope is performed after repairs have been completed to ensure the
item meets serviceability standards.
c. Table 2-1 lists initial inspection procedures for the M115 panoramic telescope. Final inspection procedures are
located on page 2-57.
Table 2-1. INITIAL INSPECTION-M115 PANORAMIC TELESCOPE
ITEM
ITEM T0
NO.
BE INSPECTED
PROCEDURE
NOTE
Azimuth testing fixture must be set up before performing initial inspection. Refer to page
2-58.
1
M115 Panoramic Telescope
Inspect telescope for completeness and secureness
of parts; must be complete and secure.
2
Identification Plate, Index, and
Inspect for legibility; must be legible and clearly
Counter Numbers
defined.
3
Mounting Surfaces
Inspect for burrs and corrosion; must be free of burrs
and corrosion.
4
Eyeshield
Inspect for security of attachment and damage such
as deterioration, cuts, or tears; must be secure,
without tears, cuts, or deterioration.
2-2
