TM 9-1240-380-34
Section 6. DEFLECTION KNOB ASSEMBLY
DEFLECTION KNOB ASSEMBLY MAINTENANCE PROCEDURES INDEX
Reference (para)
Task
Removal
Installation
DEFLECTION KNOB ASSEMBLY REMOVAL
TOOLS: # 1 cross tip screwdriver ( Phillips type)
Long nose pliers
Jewelers screwdriver
PERSONNEL: One
EQUIPMENT CONDITION: Body asembly on work bench
Procedure
Using Phillips screwdriver, remove four screws (1), four washers (2), and deflection
boresight knob assembly (3) from body assembly (4).
Using pliers, remove pin (5) from body assembly (4).
Using jewelers screwdriver, remove packing (6) from deflection boresight knob assembly
(3).
END OF TASK
Vol II