TM 9-1240-380-34
PLATE ASSEMBLY DISASSEMBLY
TOOLS: #0 cross tip screwdriver ( Phillips type)
4 oz ball peen hammer
1/16" punch
5/8" open end wrench
PERSONNEL: One
EQUIPMENT CONDITION: Plate assembly on work bench
Procedure
Step
1.
Using punch and hammer, remove two pins (1) from two nuts (2) and two studs (3).
2.
Using wrench, unscrew and remove two nuts (2).
Using hands, unscrew two wing nuts (4).
3.
4.
Using screwdriver, unscrew and remove six screws (5) and six washers (6) from two
studs (3).
5.
Remove two studs (3) from plate assembly (7).
END OF TASK
Vol II
4-22
