ARMY TM 9-1240-379-34
MARINE CORPS TM 04332A-34
16 Using solder, attach wire to terminal of
contact (32).
17 Coil excess wire into housing and install
contact (32).
18 Secure contact (32) with setscrew (33)
and seal setscrew (33) with sealing
compound.
19 Install externally threaded ring (34) and
tighten, using tubular wrench.
20 Install lampholder (35), gasket (36), and
assembly (3) and tighten.
assembly (3) and secure with two
machine screws (39); tighten machine
screws.
22 Install helical spring (40) into key (38).
23 Install detent plunger (41) against
helical spring (40).
24 Depress detent plunger (41) to com-
press helical spring until retaining ring
groove appears in the nearest slot of
key (38).
25 Install retaining ring (42).
2-25