ARMY TM 9-1240-379-34
MARINE CORPS TM 04332A-34
2-3. HEAD ASSEMBLYMAINTENANCE INSTRUCTIONS. (cont)
REASSEMBLY
WARNING
Dry cleaning solvent (SD) is
flammable and should not be
used near an open flame or in
a smoking area. Use only in
well-ventilated areas. This sol-
vent evaporates quickly and
has a drying effect on the
skin. When used without
gloves it may cause cracks in
the skin and in some cases
mild irritation or inflammation.
NOTE
Follow step 1 for the M32C
tank periscope only.
1 Clean head assembly surface with dry
cleaning solvent. Install decal (1), if
removed.
2 Position strike (2) on head assembly (3)
two machine screws (5).
NOTE
Follow step 3 for the M32 or
M32E1 tank periscope. Follow
step 4 for the M32C or
M32CE1 tank periscope.
3 Position angle bracket (6) on head
assembly (3) and secure with two
lockwashers (7) and two machine screws
(8).
4. Position strike (9) on head assembly (3)
and two machine screws (11).
2-14