TM 9-1240-262-34&P
HEADREST INSTALLATION
TOOLS: 3/8" flat tip screwdriver
1/8" socket head screw key (Allen wrench or equivalent)
SUPPLIES:
PERSONNEL: One
REFERENCES: JPG 41C for using sealing compound
EQUIPMENT CONDITION: Telescope on work bench
FRAME 1
Procedure
Step
1.
Put sealing compound on threads of two screws (1) (JPG).
Put headrest (2) on bracket (3) and line up holes.
2.
3.
Using screwdriver, install two washers (4), two screws (1) and headrest (2) on bracket
(3).
4.
Install plate (5) and pin (6) on telescope (7) (M105F only).
Using fingers, install knob (8) on setscrew (9).
5.
Place bracket (3) on telescope (7).
6.
7.
Using screwdriver (M105D) or Allen wrench (M105 F), install setscrew (9) and knob (8)
onto telescope (7).
END OF TASK
Vol II
