ARMY TM 9-1240-379-34
MARINE CORPS TM 04332A-34
3-6. ELBOW ASSEMBLYMAINTENANCE INSTRUCTIONS. (cont)
DISASSEMBLY
Remove four machine screws (7) and
5
1 Remove four machine screws (1).
four Iockwashers (8); pull out switch
assembly (9) as far as possible without
2 Pull out regulator assembly (2) from
straining wires.
elbow assembly (3) and unplug electrical
connector (4).
Label and unsolder six wires; remove
6
switch assembly (9) from elbow
3 Remove flat gasket (5) and discard.
assembly (3).
4 Remove spring pin (6) if loose or bent.
7
Remove gasket (10).
INSPECTION/REPAIR
Replace any missing, damaged, or broken
1
parts. See TM 9-1240-379-34P.
2
The switch assembly is a repairable
8 Remove setscrew (11) and pull contact
(12) from elbow assembly (3) with wire
leads attached.
9 Label and unsolder wire leads; remove
contact (12).