TM 9-1240-382-34P
Code
Definition
Code
Application/explanation
MO ................Item to be manufactured or fabricated at
C .................... Crew or operator maintenance performed
organizational level.
within organizational maintenance.
MF.................. Item to be manufactured or fabricated at the
C .................... Support item is removed, replaced, used at the
direct support maintenance level.
organizational level.
MH ................Item to be manufactured or fabricated at the
F .................... Support item is removed, replaced, used at the
general support maintenance level.
direct support level.
MD .................Item to be manufactured or fabricated at the
H ................... Support item is removed, replaced, used at the
depot maintenance level.
general support level.
AC.................. Item to be assembled at organizational level.
D .................... Support items that are removed, replaced, used
at depot, mobile depot, or specialized repair
AF ................. Item to be assembled at direct support
activity only.
maintenance level.
(b) The maintenance code entered in the fourth
position indicates whether the item is to be repaired and
AH.................. Item to be assembled at general support
identifies the lowest maintenance level with the capability to
maintenance level.
perform complete repair (i.e., all authorized maintenance
functions). This position will contain one of the following
AD .................Item to be assembled at depot maintenance
maintenance codes:
level.
Code
Application/explanation
XA .................. Item is not procured or stocked because the
requirements for the item will result in the
0 .................... The lowest maintenance level capable of
replacement of the next higher assembly.
complete repair of the support item is the
organizational level.
XB .................. Item is not procured or stocked. If not available
through salvage, requisition.
F .................... The lowest maintenance level capable of
complete repair of the support item is the direct
XC .................. Installation drawing, diagram, instruction sheet,
support level.
field service drawing, that is identified by
manufacturer's part number.
H .................... The lowest maintenance level capable of
complete repair of the support item is the
XD .................. A support item that is not stocked. When
general support level.
required, item will be procured through normal
supply channels.
D .................... The lowest maintenance level capable of
NOTE
complete repair of the support item is the depot
level.
Cannibalization or salvage may be used as
a source of supply for any items coded
L .................... Repair restricted to specialized repair activity.
above except those coded XA and aircraft
Not applicable.
support items as restricted by AR 700-42.
Z ................... Nonreparable. No repair is authorized.
(2) Maintenance code. Maintenance codes are
assigned to indicate the levels of maintenance authorized to
B .................... No repair is authorized. The item may be
USE and REPAIR support items. The maintenance codes are
reconditioned by adjusting, lubricating, etc., at
entered in the third and fourth positions of the Uniform SMR
the user level. No parts or special tools are
Code format as follows:
procured for the maintenance of this item.
(a) The maintenance code entered in the third
(3) Recoverability code. Recoverability codes are assigned
position will indicate the lowest maintenance level authorized
to support items to indicate the disposition action on
to remove, replace, and use the support item. The
unserviceable items. The recoverability code is entered in the
maintenance code entered in the third position will indicate
fifth position of the Uniform SMR Code format as follows :
one
of
the
following
levels
of
maintenance:
2