TM 9-1240-272-34&P
APPENDIX D
DIRECT SUPPORT AND
G E N E R A L SUPPORT MAINTENANCE
REPAIR PARTS AND SPECIAL TOOLS LIST
Section 1. INTRODUCTION
D-1.
in National item identification number
SCOPE
(NIIN) sequence, of all National stock
This appendix lists spares and
numbers (NSN) appearing in the listings,
repair parts; special- tools; special
followed by a list in alphameric
test, measurement, and diagnostic
sequence of all part numbers appearing
equipment (TMDE), and other special
in the listings. National stock numbers
support equipment required for per-
and part numbers are cross-referenced
formance of direct support and
to each illustration figure and item
general support maintenance of the
number appearance.
Mount, Periscope, M119 and Mount,
Periscope, M119E1. It authorizes
the requisitioning and issue of
spares and repair parts as in
D-3.
EXPLANATION OF COLUMNS
dicated by the source and mainten-
ance codes.
This column
a. Illustration.
is divided as follows:
D-2.
GENERAL
This Repair Parts and Special Tools
(1) Figure Number. Indicates
List is divided into the following
the figure number of the illustration
sections:
on which the item is shown.
a. Section II. Repair Parts List.
(2) Item Number. The number
A list of spares and repair parts
used to identify item called out in
authorized for use in the performance
the illustration.
of maintenance. The list also includes
parts which must be removed for
replacement of the authorized parts.
b. Source, Maintenance, and
Parts lists are composed of functional
Recoverability (SMR) Codes.
groups in numeric sequence, with the
parts in each group listed in figure
(1) Source Code. Source
and item number sequence.
codes indicate the manner of acquiring
Section III. Special Tools
support items for maintenance, repair,
b.
List.
or overhaul of end items. Source codes
(Not Applicable)
are entered in the First and second
c. Section IV. National Stock
positions of the Uniform SMR Code format
as follows:
Number and Part Number Index. A list
D-1
