TM 9-1240-216-34
FINAL INSPECTION JOF BODY ASSEMBLY
5-2.
PERSONNEL: One
EQUIPMENT CONDITION: Body assembly on work bench with head assembly removed
PRELIMINARY PROCEDURES: Remove head assembly (TM 9-2350-215-10 for M60A1,
TM 9-2350-257-10 for M60Al Rise, TM 9-2350-260-10
,
for M60, TM 9-2350-222-10 for M728)
NOTE
If you find a fault, tell your supervisor. If you do not find a
fault, send the good body assembly back to service.
FRAME
1
Procedure
Step
Check body assembly (1) for loose or missing parts.
1.
2.
Check body assembly for cleanliness.
Look into optical parts for dirt or moisture.
3.
NOTE
FOLLOW-ON MAINTENANCE
Install head assembly (TM 20-2).
END OF TASK
Para 5-2
Vol II
5-2
