HOW TO REMOVE/INSTALL POP-DOWN EYECUPS
The pop-down eyecup (1) is attached to binocular with adhesive at the factory. If there is
damage to the pop-down eyecup it can be removed and replaced.
To remove popdown eyecups, peel back
the rubber at the base of the eyecup and
remove from binocular.
Remove old adhesive from eye-lens housing.
Evenly apply adhesive (Item 3, p. 17) to outer surface of eye-lens housing (2).
Eye-lens housing has a while line (3) which represents the `O' diopter point.
Slide on eyecup so the `O" diopter point lines-up with white line on eye-lens housing.