TM 9-1240-401-34&P
5-14. LAMP ASSEMBLY AND RELATED PARTS (M117) MAINTENANCE INSTRUCTIONS
- continued
a. Removal/Disassembly
I
1 Remove machine screw (1), Iockwasher (2), and
electrical connector cover (3). Discard Iockwasher.
Remove LED (4).
2
Remove four machine screws (5) and access cover
3
(6).
Remove machine screw (7), Iockwasher (8), ma-
4
chine screw (9), and three lug terminals (10) with
wires (11) attached. Discard Iockwasher.
Unsolder wires (11 ) from three lug terminals (10).
5
Remove machine screw (12) and housing (13).
6
Using 11/16 and 45/64 inch tubular spanner
7
wrench, remove threaded ring (14).
Remove electrical lead (15) with wire and lug ter-
8
minal (16) attached.
Remove four machine screws (17), four lock-
9
washers (18), and holder (19). Discard lock-
washers.
10
Remove and discard preformed packing (20).
11
Remove lens (21) only if damaged.
NOTE
Remove second lamp assembly by repeating
steps 1 and 2, then 7 thru 11.
5-16