b. Repair
1 R e m o v e corrosion grease, and dirt from all parts.
Refer to TM 9-254 for cleaning instructions.
2 Visually inspect for missing or damaged parts.
3 Repair or replace parts in accordance with author-
ized parts listed in appendix D.
c. Assemblv
1
Install three clamps (30) on cable (9).
2
Install wire (29) to connector shell (23); then install
lug terminal (28) on wire.
3
Slide bushing (22), flat washer (24), preformed
packing' (25), connector shell (23), lug terminal (28)
and wire (29) onto cable (9).
4
Install preformed packing (25) and flat washer (24)
on connector shell (23).
5
Install bushing (22) on connector shell (23). Do not
tighten bushing.
6
Install two insulation sleevings (27) on leads of ca-
ble (9).
Install new gasket (26).
7
Install electrical plug connector (21) on cable (9) by
8
Install new gasket (20) on electrical plug connector
9
(21).
10
Slide connector shell (23) along cable (9) toward
electrical plug connector (21 ).
Install connector shell (23) on electrical plug con-
nector (21).
12 Install preformed packing (19) and flat washer (18)
on electrical shell connector (8).
13
Install bushing (17) on electrical shell connector
(8). Do not tighten bushing.
2-19