TM 9-1 240-400-34&P
2-12.
MAINTENANCE OF BODY ASSEMBLY, COVER ASSEMBLY, AND TELESCOPE SUBASSEMBLY (CONT).
REASSEMBL Y (CONT)
2-34
5
Apply sealing compound (item 10, appx C) under
heads of four screws (8).
6
Install two plate spacers (9) and four screws (8).
7
Apply sealing compound (item 10, appx C) to
support (10) and threads of two setscrews (11).
8
Install support (10) in body (4)
Secure support
with two setscrews (11).
9
Apply a coat of aircraft grease (item 8, appx C) to
new preformed packing (12).
10 Install new preformed packing (12) in support (10).
11 If removed, install two pins (13) in round nut (14).
12 Install collar (15) on support (10) and secure with
round nut (14).
13 Apply sealing compound (item 10, appx C) to four
setscrews (16).
14 Install four setscrews (16) by rotating collar (15) to
gain access to holes.
2-34