LAMPHOLDER AND PACKING INSTALLATION
APPLICABLE CONFIGURATIONS: M36E1
TOOLS: #2 cross tip screwdriver ( Phillips type)
REFERENCES: JPG 41C for lubricating
EQUIPMENT CONDITION: Elbow assembly on work bench
Put washer (1) and screw (2) through loop (3) in cord of lampholder (4).
Using screwdriver, install screw (2) and, washer (1) in cover (5).
Put a thin film of grease on surface of packing (6) (JPG).
Place packing (6) on lampholder (4).
Install lamp (7) into lampholder (4).
Install lampholder (4) into cover (5) by pushing in and turning clockwise.
END OF TASK