TM 9-1240-380-34
SWITCH REMOVAL (CONT)
6-22.
FRAME 1
Procedure
Step
1.
Using Allen wrench, remove setscrews (1) from knob (2). Remove knob (2).
Using screwdriver, remove three screws (3) and three washers (4).
2.
Using screwdriver, remove one screw (5) and one washer (6).
3.
Be careful when removing rotary switch because
terminals are very small and break easily.
Using wrench, remove nut (7) and washer (8). Remove plate (9) and "O" ring (10)
4.
from switch (11).
Tag four wires connected to terminals of rotary switch (11) (JPG).
5.
Using soldering iron, holding wire with tweezers, unsolder four wires connected to
6.
terminals of rotary switch (11) (JPG). Remove rotary switch (11).
Using screwstarter and tweezers, remove screw (12), washer (13), lug terminal (14), and
7.
spring tension clip (15).
END OF TASK
Vol II
6-40