TM 9-1240-380-34
Section 7. PLATE ASSEMBLY
PLATE ASSEMBLY MAINTENANCE PROCEDURES INDEX
Reference (para)
Task
4-19
Removal
Disassembly
Assembly
Installation
.
PLATE ASSEMBLY REMOVAL
TOOLS: #2 cross tip screwdriver (Phillips type)
4 oz ball peen hammer
1/8" punch
PERSONNEL: One
EQUIPMENT CONDITION: Head assembly on work bench
FRAME 1
Procedure
Step
Using screwdriver, remove ten screws ( 1).
Pull and remove plate assembly (2) from head assembly (3).
Look at two locator pins (4). If bent or damaged, using punch and hammer, remove two
locator pins (4) from head assembly (3).
END OF TASK
Vol II