TOOLS: #2 cross tip screwdriver (Phillips type)
4 oz ball peen hammer
EQUIPMENT CONDITION: Head assembly on work bench
While holding hook (1) in place, use screwdriver to install two washers (2) and two
screws (3) in head assembly (4) (Do not tighten).
Using hammer, drive in two pins (5).
Using screwdriver, tighten two screws (3).
While holding shim (6) and hook (7) in place, using screwdriver, install two washers (8)
and two screws (9) in head assembly (4).
END OF TASK