TM 9-1240-380-34
BODY ASSEMBLY INSPECTION UPON RECEIPT (CONT)
3-4.
FRAME 4
Reference
Maintenance Action
Procedure
Step
Replace latch or cotter pin.
Check that latch (1) moves
1.
smoothly and that cotter pin
(2) is not missing.
...
Tighten. Replace if missing.
Using #0 Phillips screwdriver,
2.
check that two screws (3) are
tight.
...
Tighten. Replace if missing.
Using #2 Phillips screwdriver,
3.
check that two screws (4) are
tight.
Replace.
Check that strike (5) is not
4.
bent or broken.
Replace if binding.
Pull out and check knob (6)
5.
turns from stop to stop
without binding.
...
Tighten. Replace if missing
Using spanner wrench, check
6.
that screw (7) is tight.
Clean. Replace knob assembly
Check markings on scale (8)
7.
if cannot be read after
can be read.
cleaning.
...
Tighten. Replace if missing.
Using # 1 Phillips screwdriver,
8.
check that four screws (9) are
tight.
...
If damaged or missing, tell
Check if observation window
9.
your supervisor.
(10) is damaged or missing.
GO TO FRAME 5
Vol II
3-16