TM 9-1240-380-34
BODY ASSEMBLY INSPECTION UPON RECEIPT
TOOLS: 9/64" socket head screw key (Allen wrench or equivalent)
Valve core wrench
3/8" flat tip screwdriver
0.187 spanner wrench
#0, #1, and #2 cross tip screwdriver (Phillips type)
0.070 jewelers screwdriver
3/8" and 7/16" open end wrench
# 1 offset cross tip screwdriver ( Phillips type)
SUPPLIES:
PERSONNEL: One
REFERENCES: TM 43-0139 for painting
JPG 41C for: Cleaning
Completing DA Form 2404
EQUIPMENT CONDITION: Body assembly on work bench
FRAME 1
Reference
Maintenance Action
Procedure
Step
...
1.
Check body (1) for large
Report damage to supervisor.
dents and broken windows
(2).
2.
Check around windows (2) for
If defects are found, do
...
missing or detective seal.
procedure.
If leaks are found, tell your
supervisor.
TM 43-0139
Check body (1) for chipped
Paint chipped or scratched
3.
JPG 41C for
areas. Clean corroded areas.
paint and corrosion.
cleaning
Check windows (2) for cracks,
If windows are scratched or
...
4.
cracked, tell your supervisor.
scratches. or dirt.
JPG 41C for
cleaning
If windows are dirty, clean
with lens tissue.
5.
Using #1 Phillips screwdriver,
Tighten. Replace if missing.
...
check that four screws (3)
are tight.
...
6.
If plate cannot be read, tell
Check that plate (4) can be
your supervisor.
read.
GO TO FRAME 2
Vol II