TM 9-1240-380-34
HEAD ASSEMBLY INSPECTION UPON RECEIPT (CONT)
3-3.
FRAME 4
Procedure
Reference
Maintenance Action
Step
...
1.
Using #2 Phillips screwdriver,
Tighten. Replace if missing.
check that ten screws (1) are
tight.
2.
Check that two pins (2) are
If missing or damaged,
not missing or damaged.
replace.
If missing or damaged,
Check that two nuts (3) are
3.
not missing or damaged.
replace.
4.
Check that two wing nuts (4)
If missing or damaged,
are not missing or damaged.
replace.
Check that two wing nuts (4)
5.
If binding, replace studs (5).
turn freely.
Check that two pins (6) are
6.
If missing, replace.
not missing.
NOTE
FOLLOW-ON MAINTENANCE:
Correct faults listed on DA
Form 2404 that may affect
the checkout procedure.
Do checkout procedure
END OF TASK
Vol II
3-8