TM 9-1240-380-34
3-3.
HEAD ASSEMBLY INSPECTION UPON RECEIPT (CONT)
FRAME 2
Reference
Maintenance Action
Procedure
Step
...
Tighten. Replace if missing.
1.
Using #0 Phillips screwdriver,
check that eight screws (1)
are tight.
...
Tighten. Replace if missing.
2.
Using #2 Phillips screwdriver,
check that two screws (2) are
tight.
JPG 41C
Clean. Tell your supervisor if
3.
Check that two pins (3) are
for cleaning
bent or missing.
not bent or corroded.
4.
Check that packing (4) is not
Replace if missing or
damaged.
worn or damaged.
...
Tighten. Replace if missing.
5.
Using #0 Phillips screwdriver,
check that eight screws (5)
are tight.
...
Using 1/2" wrench, check that
Tighten. Replace if missing.
6.
nut (6) is tight.
JPG 41C
7.
Clean. If missing or damaged,
Check that two pins (7) are
for cleaning
tell your supervisor.
not damaged or corroded.
...
Tighten. Replace if missing.
8.
Using #2 Phillips screwdriver,
check that two screws ( 8 ) are
tight.
...
9.
Tighten. Replace if missing.
Using #0 Phillips screwdriver,
check that two screws (9) are
tight.
10.
Check that name plate (10)
...
If it cannot be read, tell your
supervisor.
can be read.
GO TO FRAME 3
Vol II
3-4