TM 9-1240-216-34
RESISTOR ASSEMBLY INSTALLATION
4-33.
APPLICABLE CONFIGURATIONS: M19 and M24 old configurations
TOOLS:
1/16" socket head screw key (Allen wrench or equivalent)
6" slip joint pliers
Hydraulic sealing gun
1/16" flat tip screwdriver
1/2" open end wrench
Sealing compound (item 8, App A )
SUPPLIES:
PERSONNEL: One
REFERENCES: JPG 41C for using sealing compound
EQUIPMENT CONDITION: Resistor and body assembly on work bench; power supply disconnected
NOTE
This procedure is for installing either resistor.
FRAME 1
Procedure
Step
1.
Place resistor (1) in body assembly (2).
2.
Using long nose pliers, put on lockwasher (3) and nut (4).
GO TO FRAME 2
Para 4-33
4-62
Vol II